64 channel fiber optic video converter,optical fiber video converters

64 channel fiber optic video converter

The 64 channel fiber optic video converter accepts 64 composite video baseband signals via video BNC ports. It then performs a 10-bit linear analog-to-digital conversion on the baseband video signals, multiplexes the resulting PCM data, transmits the data optically via an optical fiber to the de-multiplexer.

The composite digital video transmitted from the 64 channel fiber optic video converters unit, is received and demultiplexed by the de-multiplexer, which is responsible for routing the video data to digital-to-analog converters for output via the four video output BNC port.The 64 channel fiber optic video converters are stand alone unit types and slot card types that is rack-mountable to fit in the chassis.

64 channel fiber optic video converter Feature:
10 Bit Digitally Encoded Transmission
One and Two fiber versions available
NTSC, PAL, SECAM Compatible
Surface Mount Technology
BNC I/O Video Connector
8 PIN Terminal Block Data Connector
ST, FC Optical Connector
Video, DIP selectable PTZ Data Manchester/Biphase, RS-232, RS-422, RS-485 (2 & 4 wire)
DIP Switch Activation of Termination Resistors
Up to 4km/2.5mi on multimode; 56km/35mi on single mode

64 channel fiber optic video converter Specifications:
Video Performance
Video Format: NTSC, PAL, SECAM
Video In/Output Impedance 75 Ohm (unbalanced)
Video In/Output Voltage 1.0V p-p typ, 1.5V max
Frequency Response 5Hz to 6.5MHz
Differential Gain (10-90% APL) < 0.7% typ
Differential Phase (10-90% APL) < 0.7° typ
Signal to Noise Ratio > 67dB (weighted)
Encoding 10 Bit linear PCM
Sampling Rate:16MHz

Data Performance
Data Rate DC to 115 kbs (RS-232, RS-422; RS-485)
Bit Error Rate 10-9

Indicators
Video Data ERR Presence LED
Video Data SYNC Presence LED
Power PWR Presence LEDs

Optical interface
Bit Rate Over Fiber: 1.25Gbps
Output optical power: more than-12dBm
Wavelength T to R:1310nm
Wavelength R to T:1550nm
Receiver style: PINFET
Receiving sensitivity: less than -22 dBm
Light linker style: FC ST
Transmission distance: up to 80km

Ethernet interface (optional)
Standard: comply with IEEE802.3 standard
Data rate:100Mbps
Interface rate:10-100Mbps auto-negotiation
Interface mode: Half-full duplex auto-negotiation
Interface connector:RJ45

Power supply
Requirements Voltage:DC5V1A
Source: Power Supply or Chassis Backplane
Power consumption: less than 10W

Environment
Working temperature: -20°C-+70°C
Storage temperature: -40°C~+80°C
Relative humidity: 5%~95 %




Video 64 channel fiber optic video converter,optical fiber video converters

Share on:



Wordwide perspectives

We have representatives in different places of the world.